I am almost finished with the production of these resin pendants.
There are three layers of resin.
Layer one filled the bottom of my molds. I colored the resin black and let these cure for a day.
The I added my paper images to the surface of the cured black resin.
I sealed all my paper with several layers of mod podge and let everything dry for a day.
Then, I poured my second layer of resin to cover all these inclusions.
That resin I let cure for two days.
When I took my pendants out of the mold I noticed I had a few areas where the edge of the resin was higher than the surface. I could have sanded these edges and resealed,
but I decided to add a third layer called "the doming layer" of resin.
This third layer I applied with a brush.
I let this cure for another two days.
I still have a few edges that are rough,
so I'll sand those away to complete this project.
Otherwise, I love these drops!
I am sharing an affiliate link for the mold I used for the last round of pendants.
This post written, designed and photographed by Carmi Cimicata.
Please do not repost any part of it without permission.