Monday, May 12, 2014

EastCast Tips and Inspiration

With several different resins in the ETI family of products I thought I would put a spotlight on EasyCast today.  I
 I collect molds from everywhere.  
My first tip is to always test your mold before you start working on a finished product.  I do one test casting by either pouring resin into a mold cavity or by letting a drop of resin cure on the back of my mold.  
Working in a tray mold allows you to be very creative.  As you can see in this picture I have decided to use some paper imagery in some of these molds.
 I prefer to have a first pour of EastCast cure in my mold before I add any imagery or paper.  This super clear resin is the surface I then work on.  You can see in the picture that I have poured about 2-3mm of resin into all my openings.
 When you work in a mold, you have to work backwards.  When I add paper imagery I have to trust that it looks good.  I won't know until I demold the resin castings.
 I always use a clear drying decoupage medium to glue everything into place.  I am using dried flowers and metal letters and mini parts.
 I continue to coat my dried flowers to seal them from contact with resin.  Resin will make dried flowers look a lot darker if they are not properly sealed.
 After playing with my tray for a few hours I have build up several great samples.  I allow all of this to dry overnight so that no moisture remains from the glue.
 With the glue completely dry I can see any open spaces in my resin castings.  At this point I added glitter or paint drops if I want to add more interest.  Working backwards, it is a bit of a guessing game.
My last tip today:  Be sure to seal you paper at least three times, letting each application of clear drying glue/decoupage medium dry between applications.  This will ensure that you will not have a resin stain/dark area when you pour in your final pour.
I am filling each mold opening with EasyCast and allowing them to cure overnight.

EastCast Tips and Inspiration Post One

EastCast Tips and Inspiration Post Two

EastCast Tips and Inspiration Post Three

EastCast Tips and Inspiration Post Four

These posts were designed, photographed and written by me.
They appeared on Resin Crafts Blog.
Andy M said...

Where did you get it? I'd love to have it.

Carmi Cimicata said...

Not to name drop...I bought it in Paris last week on my holiday.....the name is pebeo/gedeo.

Andy M said...

I found the pebeo/gedeo resin.... Is that also the manufacture of the mold?

Carmi Cimicata said...

Yes, that is the name on the mold.

Whatsapp Button works on Mobile Device only

Start typing and press Enter to search